Software, the reset button, and holding down the power and other buttons simultaneously can all be used to reset an HP printer. Although a factory reset or hard reset may be necessary, the issue could just need to be resolved by resetting the firmware. To establish a WiFi connection, your HP printer might need to have its network rebooted.
You may restore an HP printer to its original factory settings by using this procedure.
To utilize this method of resetting your HP Printer, locate the reset button by opening the printer's software.
Guidelines for Hp Printer Software Reset
You can use this procedure to reset the ink levels in an HP printer as well as the printer's settings back to factory defaults.
1. Lift the HP Printer's lid.
2. Find the reset button and give it a five-second hold.
3. You'll see a notice asking to reset the printer. Tap "Yes."
4. The HP Printer will resume from the factory settings.
A hard reset may be accomplished on a lot of HP printers by holding down the Power button for four seconds.
First of all Verify that everything is plugged in securely by first inspecting all of the connections and Check the amount of ink or toner of your HP Printer. Low supplies may result in issues with printing. Make sure to update your drivers because they frequently cause issues. To get rid of any waiting jobs, clear the print queue.
For troubleshooting, restart the Print Spooler service. Think about performing a factory reset to restore settings to their original state if issues continue. Check for firmware updates and hardware problems as well.
The printer is not turning on
Verify the power supply and that all of the cords are firmly attached if your HP printer won't turn on. Occasionally, a basic power cycle can work wonders.
Print Jobs That Aren't Finished
Are your print tasks obstinately stalled in the queue? To cancel the pending tasks and restart your computer and printer, navigate to the printer settings on your computer.
Problems With Wireless Printing
In case of issues with wireless printing, confirm the Wi-Fi connection of your printer. Make sure it has a strong signal and is linked to the correct network. Restart the printer and router as necessary.
Slow Printing Pace
It can be annoying when printing takes too long. For documents that aren't absolutely necessary, use draft mode to increase speed. For even more speed, think about increasing the memory in your printer.
Paper Jam Issues
Paper clogs are common, but they can be difficult to clear. To find the jammed paper and carefully remove it, go to your printer's manual. To prevent future jams, take care not to tear the paper since this could leave fragments within.
Poor Quality Printing
Low amounts of toner or ink could be the cause of poor print quality. If a cartridge is low, replace it. Use the utility software on the printer to clean the printhead as well to enhance quality.
Problems with Drivers
Printing problems may arise from outdated or incompatible drivers. To get the most recent drivers, go to the HP website, type in the model name of your printer. Once installed, restart your computer and see whether the issue still exists.
Still, you didn't get the best solutions to fix not printing problem so don't need to worry, here you will get an excellent and effective guide to fix the printer not printing issue with very little time. Check the given solutions.
Solution 1: Apply the Troubleshooter:
If your troubleshooting didn't find any hardware issue then, you must go to another solution to Fix the Printer Not The Printing issue.
Solution 2: Aligned the Printer as Default State:
Solution 3: Update your Printer Printing Driver:
After applying the above-presented solutions, if your Printer is Not Printing again then, you may go with another solution.
Does your HP Printer regularly cause trouble for you and now you want to reset your printer to see if that fixes anything. To be honest even with basic knowledge you can reset your printer whenever it gives troubles. Here are simple steps that you can do to set up your HP Printer Factory Reset Mode. You might be curious to know what is factory reset in printer. Well, resetting your printer to its original settings will remove any changes or problems. This approach will fix issues related to:
LaserJet Printers
Conclusion
HP Printer Factory Reset won’t remove your printer from your HP account or cancel Instant Ink subscriptions. Hope, we have given the answers to all your questions. In case, you have any doubt, please talk to the customer care representatives. They will be happy to help you for any doubt or query.